KME GSL - 020

GREEN SENSOR LIGHT 

?. How to install

(1) Turn off the power

(2) Take off and separate glass part sensor light from frame

     by turning it counterclockwise.

(3) Connect black power cable of the sensor light to power source  cable firmly.

     (For 2 cable type, connect one cable to black cable of sensor light, and another cable to bus)

(4) Accurately check the installation place, and attach sensor light using screws.

(5) Insert incandescent lamp, turn on the sensor light and check the operating conditions.

(6) After checkup is over, assemble glass part into frame by turning it clockwise

     (and clean the external face)

(7) Location of installed sensor light

• Door
• Stairs

• Living room
• Corridors

KME SL- 020

?. Two types of illumination sensor (Switch is selectable)

The light sensor of 2 steps of switch mode.

The light sensor gets the luminosity of where located, when it is dark, it makes turned on.

Conversely, when it is bright, it makes turned off. The green sensor is very convenient for

the diversity to choose and control working hours from developing the light sensing theory.

Night Day

(24 hour monitoring system)

Night Day

(It lights up early in the evening)

          ; and night-10Lux or less)